← Back to list

Garrison 40mm Brass Padlock

Orange Belt
Primary
Primary
Keyway
Internals
By: Majoral_ (CC BY-NC-SA 4.0, via LPU)
By: Majoral_ (CC BY-NC-SA 4.0, via LPU)
By: Majoral_ (CC BY-NC-SA 4.0, via LPU)
By: Majoral_ (CC BY-NC-SA 4.0, via LPU)
By: LockPickingFisherman (CC BY-NC-SA 4.0, via LPU)
By: LockPickingFisherman (CC BY-NC-SA 4.0, via LPU)
By: LockPickingFisherman (CC BY-NC-SA 4.0, via LPU)
By: LockPickingFisherman (CC BY-NC-SA 4.0, via LPU)
By: LockPickingFisherman (CC BY-NC-SA 4.0, via LPU)
By: LockPickingFisherman (CC BY-NC-SA 4.0, via LPU)

Core Specs

Cylinder Type
Pin-tumbler

Community Knowledge

Difficulty Notes

The biting is described as 'good, but I wouldn't say nasty.' The user infers it is 'probably a rather inexpensive lock.'

Sources (r/lockpicking):
- u/andthebatman (4pts): 'The biting is good, but I wouldn't say nasty.' ... 'I'd say it's probably a rather inexpensive lock.'
[confidence: low]

Picking Notes

TOK (Top of Keyway) tension might help with the low cut on pin #1.

Sources (r/lockpicking):
- u/andthebatman (4pts): 'TOK tension might help with that low cut on #1.'
[confidence: low]

Tension Tips

Use very heavy tension.

Sources (r/lockpicking):
- u/andthebatman (4pts): 'I'd try using very heavy tension.'
[confidence: low]

Bitting Variance

The lock has a 'low cut on #1' (likely referring to a specific pin or shear line feature). The biting action is noted as 'good' but not 'nasty'. The lock is linked to a vendor page.

Videos

Personal Tracking

No personal tracking data yet. Click Edit to add.